The benefits of adding Batte melt pump

When using a screw melt pump for extruder in series, the whole production line can benefit significantly increased , with the following advantages:

A stable output materials : melt extruder pressure pump can block many causes fluctuations applied to achieve the effect of fixed speed regulator , pressure , constant current , measurement . Melt pump inlet pressure sensor and the host to be a closed-loop control better.

2 , improve product quality : Since no pulse quantitative output , product tolerances to a minimum , the material evenly, almost the same weight .

3, to improve extrusion production : reducing the pressure on the screw and the lateral thrust on the gear box , the host can easily speed operation. Originally built by the screw to press on things to melt pump to build pressure on things , and can adjust the extruder back pressure , reduce the melt in the screw inside dwell time, increase yield and quality.

4 , reduce unit energy consumption : Test data show extruder and melt pump combination , which greatly improved mixing quality and yield than the individual extruders . Energy consumption per kilogram of processed materials can generally be reduced by about one quarter.

5 , extending the life of the machine : the use of a melt pump after the extruder screw barrel pressure is reduced , greatly reducing wear between the screw and the barrel , and relieving the host thrust load bearing gear box to extend the life of the extruder . The extrusion process is required to take the material and exhaust reflux problems will be solved.

Any questions about our products, please feel free to contact us! We promise you high-end products and first-class service.Look forward to our cooperation!!!