Melt pump of installed correctly

Damage usually melt pressure sensors are not appropriate due to its mounting position caused . If the force sensor is mounted in the hole is too small or irregularly shaped holes in the film is likely to cause vibration and impact damage to the sensor . Select the appropriate tooling mounting holes , help control the size of the mounting holes . In addition, proper installation torque is conducive to the formation of a good seal. However, if the installation is easy to cause excessive torque slip melt pressure sensor , in order to prevent this from happening , usually before the sensor is mounted on the threaded portion of its anti- smear off compounds. After the use of such compounds , even with a high torque , the sensors are difficult to remove .

Check the mounting hole dimensions

If the size of the mounting hole is inappropriate, melt pressure sensor in the installation process, the threaded portion can easily be worn . This will not only affect the sealing performance of the device and the sensor is not functioning well , and may even create a security risk. Only suitable mounting holes to be able to avoid the wear and tear ( threaded industry standard 1/2-20UNF2B) threaded mounting holes are usually measuring instrument can be used to detect the mounting holes to make appropriate adjustments.